HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 33 Error Codes — Part Code 2010
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCorrect the settings, and then
retry.
The LUSE volume cannot be
released because the access
attribute of the specified
volume is not Read/Write.
50302010
5WCorrect the specified content,
and retry.
Select the non-LUSE LDEV.50312010
5WCorrect the specified content,
and retry.
There are no LDEVs available
to set the LUSE top volume.
Check the specified LDEVs.
50322010
5WCorrect the specified content,
and retry.
There are no LDEVs available
to create the LUSE. Check the
specified LDEVs.
50332010
5WSelect LDEV and retry.No LDEV is specified.50502010
5WCheck the content of the
operation.
You cannot delete the first
LDEV of a LUSE volume.
50512010
5WCheck the content of the
operation.
This is the last path for the
LUSE volume.
50522010
5WCheck the content of the
operation.
You should map at least one
path to LUSE volume.
50532010
5WCheck the content of the
operation.
More than 36 volumes
cannot be combined to form
a LUSE.
50542010
5WFollow the correct operation
procedure.
The size of the LUSE volume
exceeds 64,424,505,600
KB.
50552010
5WFollow the correct operation
procedure.
The specified LDEV is
inaccurate.
50562010
5WClick [OK] to continue the
operation. Click [Cancel] to
stop the operation.
Are you sure you want to
perform the LUSE operation
on a volume that has a path
definition?
58122010
5WSpecify the LUSE displayed
in blue bold italic characters.
There are no LUSE volumes
that can be reset. Check the
specified volumes.
58152010
2ECall HP technical support.An error occurred in the client
logic.
70602010
0iThe specified volumes will be
expanded to LUSE volume.
All data in each LDEV will be
initialized. Do you want to
continue?
90102010
0iThe specified LUSE volume
will be released. All data in
the volume will be initialized.
Do you want to continue?
90602010
0iThe LUSE volume needs at
least one path. Do you want
to continue the operation?
91002010
0iSelect the LUSE.91502010
Remote Web Console Error Codes 133