HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 32 Error Codes — Part Code 2005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EThe configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
The number of volumes you
intend to combine into a
LUSE volume exceeds the
maximum.
10282005
6ECheck the settings, and then
retry the operation.
The following volumes cannot
be specified when you
change the expanded LU
configurations:
• Volumes that do not exist
• Volumes reserved by Auto
LUN
• System Disk volume
10502005
6ECorrect the specified
contents, and then retry the
operation.
The LUSE operation cannot
be performed because the
volume is set as a command
device.
11262005
6EThe configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
Failed to form a LUSE volume
because the number of LUSE
volumes exceeds the
maximum that can be set in
a disk array subsystem.
11372005
6ECheck the specified contents.The specified LDEV is already
used for another LUSE
volume.
11382005
2ECheck the setting.The capacity of LUSE volume
exceeds the maximum.
11822005
6EThe configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
You are trying to insert in the
linkage operation including
LUSE. (LDEV number is
inserted to the LDEV numbers
created in LUSE).
11852005
6EThe configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
You cannot expand the LU
because the host mode of the
group with paths which are
defined in the LU is
corresponding to online
LUSE.
11872005
6ECorrect the specified content,
and then retry the operation.
The LUs cannot be combined
or released by mixing the
internal and external LUs.
11962005
6ECheck the attributes of the
external volumes, and then
retry the operation.
The LUSE volume cannot be
configured because the
external volumes do not have
the same cache mode.
13622005
Remote Web Console Error Codes 129