HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 32 Error Codes — Part Code 2005
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ESelect another volume.The specified volume cannot
be set as a command device
or a component of a LUSE
volume, because it is being
used as the volume of XP
Continuous Access, Business
Copy, Auto LUN, or XP
Snapshot.
Please select another volume.
10022005
6ECall HP technical support.The specified LUSE volume
cannot be released, because
it is being used as the volume
of XP Continuous Access,
Business Copy, Auto LUN, or
XP Snapshot.
10062005
6EThe configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
The emulation type of the
volumes is not for open
systems, or the volumes are
not mounted. Check the
setting.
10092005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
10102005
6EThe configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
LU path is set to a volume
which links as an expanded
LU.
10122005
2EThe emulation type of a
volume that links as an
expanded LU is not the same.
The error does not occur
normally because it cannot
be modified in the window.
In the unlikely event that this
error occurs, contact HP
technical support.
The emulation types of the
volumes combined into a
LUSE volume are not the
same.
10132005
6EThe configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
LU path is set to the releasing
expanded LU. (You need to
release the expanded LU and
path at the same time.)
10152005
6ECheck the setting.The specified volume does
not exist.
10212005
128 Remote Web Console for Storage System Messages and Error Codes