HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 26 Error Codes — Part Code 1005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6EAssociate the XP Thin
Provisioning volume with the
same pool, and then retry the
operation.
The XP Thin Provisioning
volume is not associated with
a pool. Associate the XP Thin
Provisioning and a pool first.
656601005
6ESelect another volume.XP Thin Provisioning
volume(s) cannot be
combined into LUSE volumes.
656721005
6EAssociate the XP Thin
Provisioning volumes with the
same pool, and then retry the
operation.
The Thin Provisioning volumes
are not associated with the
same pool. Associate the XP
Thin Provisioning volumes
with the same pool first.
657041005
Table 27 Error Codes — Part Code 1010
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
5WCorrect the specified content,
and issue the request again.
(Currently, Bad Value Send
report in Set Response.)
The specified fibre address is
invalid.
10231010
5WCorrect the specified
contents, and request the
setting of the configuration
information again.
The specified host group is
already used.
10651010
5WCorrect the specified content,
and retry.
The specified LDEVs and free
LUNs should be the same
number.
50101010
5WYou cannot specify any more.The number of LU paths in
use has already reached the
maximum (2,048 in a Fibre
Channel environment).
50401010
5WReduce the number, and
retry.
The number of LUNs in use
has already reached the
maximum number of LUNs
that can be specified per host
group (2,048 in a Fibre
Channel environment).
50411010
5WReduce the number, and
retry.
The number of LUNs in use
has already reached the
maximum number of LUNs
that can be specified per port
(2,048 in a Fibre Channel
environment).
50421010
5WReduce the number, and
retry.
The selected number of LDEVs
exceeds the number of free
LUNs.
50431010
5WCheck the content of the
operation.
The specified LUN had been
set.
50501010
3ECheck the content of the
operation.
The selected LUN is not a
command device.
50511010
5WCheck the content of the
operation.
Select the LUN that is already
assigned.
50521010
Remote Web Console Error Codes 117