HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 26 Error Codes — Part Code 1005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
3ERetry the operation later.Communication busy. Retry
later.
20321005
6EThe host is mounted or the
device is reserved. Unmount
the host and cancel
reservation of the device. If
the host is an AIX host,
unmount the host, and
execute the varyoffvg
command.
Processing is disabled
because the host is mounted
or the device is reserved.
20821005
2ECheck the DKC status and the
current status of the
configuration setting. If
necessary, re-execute the
setting operation.
The subsystem status is
invalid. Call HP technical
support.
20831005
2ECheck the DKC status and the
current status of the
configuration setting. If
necessary, re-execute the
setting operation.
The subsystem status is
invalid. Call HP technical
support.
20841005
6EStop executing I/Os, and
then retry the operation.
The host specified by the
WWN is performing I/O
operations.
20971005
6ECall HP technical support,
when the same problem
persists.
The operation cannot be
performed, because the SVP
microcode version does not
match the DKCMAIN
(subsystem) microcode
version.
20981005
6EWait a few seconds, and
then retry the operation. If the
same problem persists, call
HP technical support.
The operation cannot be
performed, because an
inoperative MP exists.
20991005
2EClick [All Refresh] and refresh
the configuration.
An error occurred while
connecting to the storage
system. The configuration
may be inconsistent. Select
[All Refresh] and refresh the
configuration.
21001005
6ECorrect the settings, and then
retry.
The volume cannot be
configured as a command
device because the volume
does not have Read/Write
attribute.
25011005
6ECorrect the settings, and then
retry.
The LUs cannot be combined
or released because the
volumes don't have
Read/Write attribute.
25021005
6ECorrect the settings, and then
retry.
The LUs cannot be combined
or released because the
volumes don't have
Read/Write attribute.
25031005
Remote Web Console Error Codes 113