HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 26 Error Codes — Part Code 1005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
6ESelect another volume.The specified volume cannot
be set as a command device
because it is being used as a
V-VOL for XP Snapshot.
19061005
6ECorrect the settings, and then
retry the operation.
The specified volume is a
remote command device, and
therefore the command
device setting or the
command device security
setting cannot be set or
released.
19121005
6EDelete the external volume
that is mapped to the external
port to be operated, and then
retry the operation.
An external volume is
mapped to the external port
to be operated. Delete the
external volume that is
mapped to the external port
to be operated, and then
retry the operation.
19181005
6ECheck the volume, and then
retry the operation.
The specified volume is not a
LUSE volume.
19211005
6ERestore the LDEVs, and then
retry the operation.
LDEVs that are not normal are
included in the component of
a LUSE volume.
19221005
6ECheck the setting.The path cannot be set to the
specified volume, because
the volume is being used as
a quorum disk.
19261005
6ECheck the setting.The specified volume cannot
be set as a command device,
because it is being used as a
quorum disk.
19271005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
20051005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
20091005
6ECheck if the host is
performing I/O operations on
the target path or volume.
The LDEV is being used by
the host, or an error occurred
during SVP processing.
Recovery processing may
take about 1 minute. Wait for
a while.
20101005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
20131005
6EA communication error
occurs. If the error occurs
after retrying, call HP
technical support.
An error occurred while
connecting to the subsystem.
Wait for a while, and then
retry the operation.
20151005
112 Remote Web Console for Storage System Messages and Error Codes