HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96086, May 2011)

Table 26 Error Codes — Part Code 1005 (continued)
Failure
Level
Severity
Level
Recommended ActionError MessageError
Number
Part
Code
2EThe specified volume does not
exist. (You have specified
wrong CU#:LDEV#.) Or the
LDEV (exclusively for
mainframe) cannot be
processed in this agent. The
error does not occur normally
because it is guarded in the
screen. In the unlikely event
that this error occurs, contact
HP technical support.
An error occurred. If this
problem persists, call HP
technical support.
10211005
2EHost mode is invalid. (The
specified value is not in the
specification.) The error does
not occur normally because
it is guarded in the screen. In
the unlikely event that this
error occurs, contact HP
technical support.
An error occurred. If this
problem persists, call HP
technical support.
10221005
2EIf this problem persists, call
HP technical support.
An error occurred. If this
problem persists, call HP
technical support.
10231005
2EFibre topology information is
invalid. (The specified value
is not in the specification.)
The error does not occur
normally because it is
guarded in the screen. In the
unlikely event that this error
occurs, contact HP technical
support.
An error occurred. If this
problem persists, call HP
technical support.
10241005
6EThe configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
The specified LU path does
not exist.
10251005
6EThe configuration information
has been already changed.
Check the settings, and
request the setting of the
configuration information
again.
The number of volumes you
intend to combine into a
LUSE volume exceeds the
maximum.
10281005
2EIf this problem persists, call
HP technical support.
An error occurred during SVP
processing. If this problem
persists, call HP technical
support.
10291005
104 Remote Web Console for Storage System Messages and Error Codes