HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)
Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
9605
58436
The access attribute of the
logical volume has already
been
changed.
See the Data Retention
Utility window and check
the
following about the
logical volume you have
selected:
•
The access attribute must
be
Read/Write
•
The logical volume must
be
able to be specified
as
an S-VOL
•
You must be able to set
a
path to the logical
volume using the RAID
ManagerorRemote
Web Console
• No mode is
set using the
RAID Manager
E 5
9605
58437
VMA is set to the logical
volume.
Select a logical volume
without VMA.
E 5
9605
58438
This logical volume is
configu
red as a command
devic
e.
Please check the logical
volume
configuration, then
retry
the
operation.
E 5
9605
58442
The emulation type of
the
logical volume is not
OPEN-V.
Select a logical volume
whose emulation type is
OPEN-V.
E 5
9605
58443
The logical volume is a
mainframe volume.
Please specify an
open-system volume.
E 5
9605
58444
A VMA cannot be set up on
this
logical volume because
Continuous Access, Business
Copy, or Continuous Access
Journal is using the logical
volume.
Plea
se
release the pair
sta
te
or set up the VMA on
ano
ther logical volume.
E 5
9605
58445
A VMA cannot be set up on
this
logical volume because
Business Copy is using the
logical volume.
Please release the Business
Copy pair, or set up the
VMA
on another logical
volume.
E 5
9605
58447
The command was rejected,
because you tried to set
VMA to a logical volume
with a path set on.
Select other logical volumes
without VMA, or delete
the path of the specified
logical volume, then retry
the
operation.
E 5
9605
58448
The specified logical volume
is
blocked, or the LDEV
is
being formatted or
shredded.
Retry the operation after
the
logical volume has
recovered from the blocked
status or after the LDEV has
been formatted or shredded.
E 5
384
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes