HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
8105 1352
Logical paths remain on
the
Fibre-MCU port. This
operation may cause a fatal
damage to the logical paths.
Please stop this operation.
If
you want to c ontinue this
operation, please remove
the
logical paths from the
MCU
port first.
Since the port you are trying
to set
is for Fibre Continuous
Access, you must delete the
logical pa th, then retry the
port setting.
E
2
8105 1353
S-VOLs remain on the
Fibre-RCU port. This
operation may cause a
fatal damage to S-VOLs.
Please stop this operation.
If
you want to c ontinue this
operation, please remove
theS-VOLsfromthe RCU
port first.
Since the port you are trying
to set
is for Fibre Continuous
Access, you must delete the
S-VOL logical path which is
set to RCU Target, then retry
the port setting.
E
2
8105
1354
Failed to add the WWN to
the
initiator port.
The port you are trying to
set is f
or
Fibre Continuous
Access
.You must change
the at
tribute when adding a
WWN. A
ttribute (TarGet or
RCU Ta
rGet)
E
2
8105 1355
Thehostmodeofthe host
group connected to the
Initiatorportcannotbe
changed.
The port you are trying to
set is for Fibre Continuous
Access. You must change
the attribute when adding a
WWN. Attribute (Target or
RCU Target)
E
2
8105 1356
The host group cannot be
added to the Initiator port.
The port you are trying to
set is for Fibre Continuous
Access. You must change
the attribute when adding a
host group. Attribute (Target
or
RCU Target)
E
2
8105 1357
S-VOLs remain on the
Fibre-RCU port. This
operation may cause a
fatal damage to the S-VOLs.
Please stop this operation.
If
you want to c ontinue this
operation, please remove
theS-VOLsfromthe RCU
port first.
The specified Port is for Fibre
Continuous Access. Please
delete a logical path, then
retry the operation.
E
6
8105 1362
TheLUSEvolumecannot
be
configured because the
external volumes do not
have the same cache mode.
Check the attributes of the
external volumes, then retry
the operation.
E
6
8105
1364
Theporttypeisincorrect.
Check the port type, then
retry the operation.
W
5
8105 1600
This functionality is not
available. LUN Manager is
required.
Install the necessary
program product. When an
SLPR is allocated, install a
necessary program product
for the SLPR.
E
6
XP24000/XP20000 Remote Web Console Error Codes
349