HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
and enable command
device security on the
volume.
8105 1125
There are no h
ost
groups
where the WWN
will be
registered
.
The Configuration
information h
as
been
already chan
ged.
Please check
the settings
and request the setting of the
configurati
on
information
again.
E
6
8105 1126
A volume set as a command
device cannot be used as
a
component of a LUSE
volume. Select another
volume.
Correct the specified
contents, and request again.
E 5
8105 1127
An error occurred. If this
problem persists, please call
technical support.
CHA high-speed mode is
specified to an unmounted
CHA.
The error does not
occur normally because it
is
guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
8105 1128
An error occurred. If this
problem persists, please call
technical support.
Arequ
est
has been made
to
cha
nge
to a channel
speed
change is requested,
but F
ibre PCB does not
supp
ort it. The error does
not
o
ccur normally because
it
i
s
guarded in the screen.
In
t
he
unlikely event that
thi
s
error occurs, contact
te
chnical support.
E
2
8105 1130
The specified name is the
same as the system default
name. Please change the
name.
Correct the specified
contents, and request again.
E
6
8105 1131
Failed to set the host group
because the number of
host groups exceeds the
maximum that can be set in
aport.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 1132
Failed to set the WWN
because the number of
WWNs exceeds the
maximum that can be set in
aport.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
346
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes