HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
8105 1022
An error occurred. If this
problem persists, please call
technical support.
Host mode is invalid. (The
specified value is not in the
specification.) The error
does not
occur normally
because it is guarded in
the screen. In the unlikely
eventthatthiserror occurs,
contact technical suppor t.
E
2
8105 1023
The specified fiber address
is
wrong.
Correct the specified
content, and issue the
request again. (Currently ,
Bad Value Send report in
Set Response.)
W
5
8105
1024
An error occurred. If this
problem persists, please call
technical support.
Fibre topo
logy information is
invalid. (The specified value
is not
in the specification.)
The error does not occur
normally because it is
guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
8105 1025
The specified LU path does
not
exist.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 1028
The number of volumes you
intend to combine into a
LUSE volume exceeds the
maximum.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 1029
An
error occurred during
SVP processing. If th is
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
8105 1050
The following volumes
cannot
be specified when
you change expanded LU
configurations:
•
Volumes reserved by
Auto L UN
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 1059
LUN Manager function (LUN
security) settings are given
to the ports other than Fibre
ports.
Check the setting.
You are trying to perform
LUN Security operation for
non-Fibre port. The error
does not
occur normally
because it is guarded in
the screen. In the unlikely
eventthatthiserror occurs,
contact technical suppor t.
E
2
XP24000/XP20000 Remote Web Console Error Codes
343