HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
administrator. To continue
the
operation, please
contact the storage
administrator. To perform
other
operations, select a
function button.
To perform other operations,
select a function button.
8005 56526
The resources of other
SLPR(s) cannot be accessed.
Correct the settings, then
retry the operation.
E
6
Table 66 Error Codes — Part Code 8105
Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
8105 1002
The specified volume cannot
be
set as a command
device or a component of
aLUSEvolume, because
it
is being used as a
Continuous Access, Business
Copy, Cross-system Copy,
Auto LUN, or XP Snapshot
volume. Select another
volume.
Select another volume.
E
6
8105 1003
You are tr ying to set multiple
paths to the same volume
from one group.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 1004
Multiple volumes are
specified to a single port,
group or LUN combination.
The Co
nfiguration
information has been
already changed.
Please check the settings
and
r
equest the setting of the
configuration information
again.
E
6
8105 1005
The following volumes
cannot
be specified
when you change path
configurations:
•
Volumes that do not exist
•
Volumes other than top
LUs in expanded LUs
•
Volumes reserved by
Auto L UN
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
8105 1007
Failed to remove the path.
The specified path is the last
path of the volumes used for
Continuous Access, Business
Copy, Cross-system Copy,
Auto LUN, or XP Snapshot.
Check the set ting.
E
6
XP24000/XP20000 Remote Web Console Error Codes
341