HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
7110
6504
The number of pairs exceeds
the
maximum.
You cannot create a pair for
the
specified S-VOL. Delete
the created pair, and retry
the
operation.
i
0
7110 7310
Unregistered error code.
Please call technical
support.
W
0
7110 7311
The settings
could not be
applied.
Wait a while, and retry the
operation. If the same error
occurs despite retrying,
Please call technical
support.
W 0
7110 7312
The password could not be
acquired.
Please call technical
support.
W
0
7110 7313
Error details not available.
Please call technical
support.
W
0
7110
744 0
An error o
ccurred d uring
processing. If this problem
persists, please call
technical support.
If this problem persists, call
technical support.
E
2
7110 8001
A time-out error occurred.
Please wait for the subsystem
to recover to the normal
condition, and then retry the
operation.
Retry the operation. If
you get the same message
again, reboot the computer.
If
necessary, call technical
support.
E
4
7110
8534
An internal logic
contradiction occurred.
Please call technical
support.
i
0
7110 8658
Some s
ettings could not be
applied normally. Refer to
the
error code.
Check the error code in
Preview list.
E
0
7110 8659
There is no volume.
Check the contents, and
retry .
i
0
7110 9002
The requested operation has
completed.
The operation was ended
normally. Execute the next
operation.
i
0
71
10
90
05
An
error occurred. Check
th
eerror code.
An
error occurred during
th
e
indicated operation.
Se
e
the error code for each
o
peration in Preview List.
i
0
7110 9101
Do you want to can cel? To cancel, click [OK].
i
0
7110 9102
Do you want to apply?
Click [OK] to execute the
operation.
i
0
7110 9108
The option has been
changed. If you continue
processing before ap plying
the
change, the option
will be reset to the current
setting. Do you want to
continue
processing?
To continue processing,
click [OK]. Otherwise, click
[Cancel].
W
0
7110 9109
Do you want to execute the
Set
Over operation?
To continue processing,
click [OK]. Otherwise, click
[Cancel].
W
2
336
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes