HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
7010 8658
Some settings could not be
applied normally. Refer to
the
error code.
Check the error code in
Preview list.
E
0
7010 8659
The PCB required for this
operation is not mounted.
Check the subsystem
configuration.
Mount the required PCB,
then
retry the operation.
i
5
7010 9002
The request operation has
completed.
The operatio
n
was ended
normally. E
xecute the next
operation.
i
0
7010 9005
An error occurred. Check
the
error code.
An error occurred during
the indicated operation.
See
the error code for each
operationinPreview List.
i
0
7010 9101
Do you want to can cel? To cancel, click [OK].
i
0
7010 9102
Do you wan
ttoapply?
Click [OK] to execute the
operation.
i
0
7010 9108
The option has been
changed. If you continue
processing before ap plying
the
change, the option
will be reset to the current
setting. Do you want to
continue
processing?
To continue processing,
click [OK]. Otherwise, click
[Cancel].
W
0
7010 9109
Do you want to execute the
Set
Over operation?
To continue processing,
click [OK]. Otherwise, click
[Cancel].
W
2
7010 9110
Do yo
uwant toexecute the
Init
ialize operation?
To continue processing,
click [OK]. Otherwise, click
[Cancel].
W 2
7010 9303
There are no valid volumes.
Check the device emulation
and
the definition of the
SCSI path.
W 0
7010 55003
The selected S-VOLs include
a
volume or volumes that
is/are paired.
Check the selected S-VOLs.
i
0
7010
55004
The number of selected
P-VOLs doesn't match
the
number of selected
S-VOLs. Correct the number
of
selected P-VOLs and
S-VOLs.
Correct the number of
selected P-VOLs and S-VOLs.
i
0
7010 59000
TheCLPRusedfor theP-VOL
differs from the CLPR used
for the S-VOL. Do you want
to
continue this operation?
To continue the operation,
click [OK].
i
0
7010
59048
The P-VOL and the S-VOL
belong to
different S LPRs.
Do
you want to continue this
operation?
To continue the operation,
click [OK].
i
0
320
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes