HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
6610
5140
The specified CU number
is
incorrect. Specify the
correct CU number.
Specify the correct CU
number.
W
0
6610
5141
The specified LDEV number
is
incorrect. Specify the
correct LDEV number.
Specify the correct device
number.
W
0
6610
5144
Some of the entered values
are incorrect. Check the
values and then specify
correct values.
Check the values, then
specify correct values.
W
0
6610 7301
An error occurred in client
logic.
Please call technical
support.
E
2
6610 7 302
An error occurred in client
logic.
Please call technical
support.
E
2
6610 7 303
An error oc
curred in client
logic.
Please cal
l
technical
support.
E
2
6610
7440
An error occurred during
processing. If this problem
persists, please call
technical support.
If thesameerror occurs
despite retrying, call
technical support.
E
2
6610 8101
The system cannot apply the
new c onfiguration. D o you
want to refresh?
Click [Refresh], and retry.
W
5
6610 9006
Exchange the channel
cable c
onnections after
confir
mation of the port
type.
Check the port type, then
change cable connections.
W
5
6610 9008
SIMs of Continuous Access
Journal and Universal
Replicator for Mainframe
are cleared.
Click [OK].
W
0
6610 9009
The export is complete. Click [OK].
i
0
6610 9021
The
Port Setting process has
not
completed. Do you want
to
c
ontinue for other ports?
To co
ntinue processing,
click [Yes]. If the processing
fini
shes, reconfigure the port
tha
t
is not in operation.
W
5
6610
9024
Are you sure you want to
exchange the specified
ports? Please confirm the
associated channel paths
are off-line.
Please ensure that the
associated channel paths
are offline.
W
5
6610 9025
Are you sure you want to
switch the ports? If the
remote copy paths exist
on the
ports, delete them
beforehand.
Please remove remote copy
paths associated with the
ports.
W
5
XP24000/XP20000 Remote Web Console Error Codes
289