HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)
Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
0003 1018
An error occurred. If this
problem persists, please call
technical support.
The specified port does not
exist. You have specified
awrong port number. Or
the specified port type
(exclusively for mainframe)
cannot
be processed in this
agent. The error does not
occur normally because it
is guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
0003 1020
An error occurred. If this
problem persists, please call
technical support.
LUN is invalid. (The
specified value is not in the
specification.) The error
does not
occur normally
because it is guarded in
the screen. In the unlikely
eventthatthiserror occurs,
contact technical suppor t.
E
2
0003 1021
An err
or
occurred. If this
probl
em
persists, please call
tech
nical support.
The specified volume
does not exist. (You
have specified wrong
CU#:LDEV#.) Or the LDEV
(exclusively for mainframe)
cannot
be processed in this
agent. The error does not
occur normally because it
is guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
0003 1022
An error occurred. If this
problem persists, please call
technical support.
Host mode is invalid. (The
specified value is not in the
specification.) The error
does not
occur normally
because it is guarded in
the screen. In the unlikely
eventthatthiserror occurs,
contact technical suppor t.
E
2
0003 1023
An error occurred. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
0003
1024
An error occurred. If this
problem persists, please call
technical support.
Fibre topology information is
invalid. (The specified value
is not
in the specification.)
The error does not occur
normally because it is
guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
XP24000/XP20000 Remote Web Console Error Codes
27