HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
6505
58342
The specified volume cannot
be used as a
journal volume
because of a Data Retention
Utility setting or a Volume
Retention Manager setting.
Please check the setting
of
the volume in the Data
Retention Utility window
or
the Volume Retention
Manager window.
W
0
6505 58343
The specified volume cannot
be used as a
journal volume
because of a Volume
Security setting.
Please check the setting of
the
specified volume in the
Volume Security window.
W 0
6505 58344
The Add P air
(Paircreate)
operation f
ailed because the
specified se
condary data
volume is a
LUSE volume.
Please check the specified
secondary data volume and
specify a non-LUSE volume.
W 0
6505
58345
The Add Pair (P aircreate)
operation failed due to one
of
the following reasons:
•
The IO suppression
mode
of the specified
secondary data volume
is
enabled.
•
The microcode version of
the secondary subsystem
does not support external
volumes.
Be sure that IO suppression
mode
of the specified
secondary data volume is
enabled on the
External
Storage window. If the
IO suppression mode
is
disabled, check the
micr ocode version of
DKCMAIN of the secondary
storage system, and call
technical support.
W
0
6505
58346
The Paircreate operation
failed because a Data
Retention Utility VMA was
set
up on the specified
secondary data volume.
From the Data Retention
Utility window, check the
settings of the specified
secondary data volume.
W
0
6505
58347
The Add Pair (P aircreate)
operation failed because of
a
Volume Security setting
on
t
he
specified secondary
da
ta
volume.
Plea
se
check the setting
of
the specified secondary
data volume in the Volume
Security window.
W
0
6505
58348
The Paircreate operation
failed because a Data
Retention Utility VMA was
set
up on the specified
primary data volume.
From the Data Retention
Utility window, check the
settings of the specified
primary data volume.
W
0
6505
58349
The Add Pair operation
failed because the specified
primary data volume had
aProtect attributeset by
Volume Retention Manager.
From the Volume Retention
Manager window, check
the
settings of the specified
primary data volume.
W
0
6505 5835 2
The Add Pair (P aircreate)
operation failed because
the
specified primary data
volume was one of the
following:
•
aBusinessCopyS-VOL
•
aShadowImage for
Mainframe T-VOL
•
areserved volume
Please check the status of
the
primary data volume in
the
Business Copy window
or the
ShadowImage for
Mainframe window.
W
0
262
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes