HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
0003 1007
Failed to remove the path.
The specified path is the last
path of the volumes used for
Continuous Access, Business
Copy, Cross-system Copy,
Auto LUN, or XP Snapshot.
Check the setting.
E
6
0003 1009
The emulation type of the
volumes combined into a
LUSE volume is not for open
systems.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
0003 1010
An error oc
curred during
SVP p rocessing. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
0003 1011
An error occurred. If this
problem persists, please call
technical support.
Thevolumewhich linksas
an expanded LU extends
over CU#. The error does
not
occur normally because
it is
guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
0003 1012
LU path is set to a volume
which links as an expanded
LU.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
0003 1013
Th
eemulation typesofthe
vo
lumes
combined into a
LU
SE
volume are not the
s
ame.
The emulation type of a
volume which links as an
expanded LU is not the
same. The error does not
occur normally because it
is
guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
0003 1015
LU path is set to the releasing
expanded LU. (You need to
release the expanded LU
and path a t the same time.)
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
26
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes