HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
0002 5857 8
An error occurred in
the
storage system. The
configuration may be
inconsistent. Please select
[All
Refresh] and refresh the
configuration.
Click [ All Refresh] and
refresh the configuration.
E
2
0002 66100
The Login could not be
performed because a
function failed to start
during SVP in itialization.
Please ca ll technical
support.
Please call technical
support.
E
3
Table4ErrorCodes—PartCode0003
Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
0003 1002
The specified volume cannot
be
set as a command
device or a component of a
LUSE volume, because it is
being used as a Continuous
Access, Business Copy,
Cross-system Copy, HP
StorageWorks XP Auto
LUN Sof
tware, or HP
Stora
geWorks XP Snapshot
volum
e. Select another
volum
e.
Select
another
volume.
E
6
0003 1003
You are tr ying to set multiple
paths to the same volume
from one group.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
0003
1004
Multiple volumes are
specified to a single port,
group or LUN combination.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
0003 1005
T
he
following volumes
cannot
be specified
when you change path
configurations:
•
Volumes that do not exist
•
Volumes other than top
LUs in expanded LUs
•
Volumes reserved by
Auto L UN
•
Volumes to which the Just
in
Time Storage function
is
applied
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
XP24000/XP20000 Remote Web Console Error Codes
25