HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
65 05 8898
Pending data exists on the
port.
Retry the operation.
i
4
65 05 8899
An internal error occurred.
Please check the SSB log,
then
call technical support.
E
4
6505 8900
An error occur
red during the
port change.
Please call te
chnical
support.
E
4
6505 8901
An error occurred during the
port change.
Please call technical
support.
E
4
6505 8902
An error occurred during the
port change.
Please call technical
support.
E
4
6505 8903
Unknown Er
ror Code.
Please call technical
support.
E
4
6505 8915
Remote Web Console
attempted to change the
port type. However, this
attempt was rejected
because the same operation
wasinprogressfromahost.
Please check the status
of the port, a nd retry the
operation.
W
0
6505 8922
The primary subsystem does
not support remote copy via
serial interface.
Check whether the primary
storage system supports
remote copy via serial
interface. Install the
microcode that supports
remote copy via serial
interface, or execute remote
copy via fibre interface.
E
4
6505
8924
Logical paths are defined
to
the port on the remote
subsystem.
Plea
se
delete the logical
paths on the specified port
and
retry the operation.
E
4
6505 8929
Invalid port type.
Please check the port type
of
the specified port and
retry the operation.
W 4
65 05 8930
Logical paths are defined
to
the port on the remote
subsystem.
Please delete the logical
paths on the specified port
and
retry the operation.
E
4
6505 8931
Log
ical paths are defined
to
the
port on the remote
su
bsy stem.
Please delete the logical
pa
ths
on the specified port
an
d
retry the operation.
E
4
6505 8932
Failed to create the
logical path, because the
configuration definition of
the
specified LD KC number
did not exist in the primary
storage system.
Please check whether the
specified LDKC number is
defined in the configuration
of
the primary storage
system.
W
0
6505
8934
The Add Pair (P aircreate)
operation failed because
the
specified secondary
data volume was a NAS
system volume.
Check the configuration
of
the specified secondary
data volume.
W
0
248
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes