HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)
Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
6505 8722
Path creation failed.
Check the path connections
between the local and the
remote storage sy stems, then
retry the operation.
E
4
6505 8723
The Edit Path operation
was rejected because the
specified path is the last
path of some Continuous
Access pairs.
Add another path, or delete
all
pairs on the remote
storage system. Then retry
the
operation.
i
4
6505
8724
The specified number of
pathsislessthan the
minimum number specified
in the
DKC Option window.
Check the nu
mber of paths.
i
4
6505 8727
The number of minimum
paths exceeds the number
of
normal paths.
Do either of the following to
recover from the error:
• If the
error code is 100c,
add normal paths, then
set the minimum number
of
paths.
• If the
error code is
100d, add normal
paths, then delete paths.
Alternatively, reduce
the
minimum number of
paths, then delete pa ths.
i
4
6505 8728
The number of minimum
paths exceeds the number
of
normal paths.
Do either of the following to
recover from the error:
• If the
error code is 100c,
add normal paths, then
set the minimum number
of
paths.
• If the
error code is
100d, add normal
paths, then delete paths.
Alternatively, reduce
the
minimum number of
paths, then delete pa ths.
i
4
6
505
8
729
An internal error occurred.
P
leasecheck theSSB log,
t
hen
call technical support.
E
4
6505 87 30
The specified logical
address is incorrect.
Do either of the following to
recover from the error:
• If
you are adding DKCs,
specify the same logical
address.
• If
you are editi n g paths,
specify the same logical
address as the existing
paths.
i
4
6505 87 31
The existing logical
addresses are not the
same.
Delete the DKC once, then
add
the DKC using the same
logical address.
i
4
242
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes