HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)
Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
6505 7310
This error code is not
registered.
If thesameerror occurs
despite retrying, call
technical support.
E 5
6505 8000
An error occurred during
SVP p rocessing. If this
problem persists, please call
technical support.
Retry the operation. If
this problem persists, call
technical support.
E
3
6505 8001
A communication time-out
error occurred in the
subsystem. Please wait for
a
while, and then retry the
operation.
Please wait a while, then
retry the operation.
E
3
6505 8002
A communication time-out
error occurred in the
subsystem. Please wait for
a
while, and then retry the
operation.
Please wait a while, then
retry the operation.
E
3
6505 8100
An error occurred during
SVP p rocessing. If this
problem persists, please call
technical support.
Retry the operation. If
this problem persists, call
technical support.
E
2
6505 8102
This function is not
supported.
Check w
hether the
DKCMAI
Nmicrocode
versi
on and
the SVP
micro
code version are
misma
tched.
E
3
6505 87 00
Please retry operation. Retry the operation.
i
4
6505 87 01
The logical pa th between
the local and the remote
subsystems is invalid.
Check the path status and
edit the path again.
i
4
6505 87 02
The
status of the primary
dat
avolumeisnot valid.
Plea
se
refresh and check
the
window . If possible,
ret
ry the operation on the
pri
mary data volume.
i
4
6505 87 03
The specified number of
pathsislessthan the
minimum number of paths
in the
DKC Option window.
Check the number of paths.
i
4
65 05 8 704
The specified number of
pathsislessthan the
minimum number of paths
in the
DKC Option window,
due
to a communication
error between the local and
theremotesubsystems.
Please check the path status
in
the DKC Status window,
then
restore the paths.
W 4
65 05 8 705
The path could not
be
deleted due to a
communication error
between the local and
theremotesubsystems.
Please check the CHA status
on
the window. If the CHA is
blocked, replace the CHA,
then
retry the operation.
W 4
6505 87 06
Parameter specified
by Continuous Access
operation is invalid.
Enter the correct data.
i
4
240
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes