HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
6010 59030
The monitoring data saved
at
present will be deleted.
To continue the operation,
click [OK]. To cancel the
operation, click [Cancel].
The monitoring data
currently saved will be
deleted if you change the
setting of the monitoring
switch. If necessary, use
the
Performance Monitor
Export Tool to export the
monitoring data file.
i
5
6010 59031
The monitoring data saved
at
present will be deleted
when the monitoring switch
is
set to Enable the next
time.
To continue processing, click
[OK]. To stop processing,
click [Cancel].
The monitoring data
currently saved will be
deleted when you change
the
setting of the monitoring
switch. If necessary, use
the
Export Tool to save the
monitoring data.
i
5
6010 65663
The specified LDKC number
is
incorrect. Specify the
correctLDKCnumber.
Specif
ythe correctLDKC
number
.
W
0
6010 65664
The specified volume is
not valid for this program
product. Specify another
volume.
Specify another volume.
W 0
6010 65665
The specified volume is not
thevolumetobemonitored.
Check the monitoring
setting.
Check the monitoring
setting.
W
0
6010 69022
There are no RCUs
available. Register RCUs in
the
CU or
RCUs of CU Free,
th
en
retry the operation.
Reg
ister RCUs in the CU or
RCUs of CU Free, then retry
the
operation.
W
0
6010 69023
There are no RCUs
available. Register RCUs
of
CU Free. Or if you use
RCUs whose CU is specified,
select the CU from the tree
and retry the operation.
RCUs of CU free are
required to create a pair o n
this node. Register RCUs of
CU
free. Or if you use RCUs
whose CU is specified,
select the CU from the tree
and
retry the operation.
W 0
6010 69033
Since the number of
preview data exceeded
the
maximum, the excess
data were discarded. No
more preview data can be
stored.
Click [OK]. Apply the
Preview data to the disk
storage system, then retry
the
operation.
W 0
6010
69034
The number of preview data
exceeds the maximum.
No
more preview data can
be
stored.
Click [OK]. Apply the
Preview data to the disk
storage system, then retry
the
operation.
W
0
238
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes