HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)
Table 49 Error Codes — Part Code 6005
Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
6005 5013
An error occurred during
SVP p rocessing. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
6005 5099
An error occu
rred during
SVP p rocessing. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
6005
5145
This function does not
support the specified por t.
Refresh the screen .
i
4
6005 6000
An error occurred during
SVP p rocessing. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
6005 6012
An error o
ccurred d uring
SVP p rocessing. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
6005 6023
The SVP is busy. Please wait
for a while, and then retry
the
operation.
If thesameproblem
persists despite retrying,
call
technical support.
E
3
6005 8000
A time-out error o ccurred.
Retry the operation. If
you get the same message
again, reboot the computer.
If
necessary, Please call
technical support.
E
4
6005 8001
Atim
e-out
error occurred.
Retry
the
operation. If
you g
et the
same message
agai
n, reboot the computer.
If
necessary, Please call
technical support.
E
4
6005 8100
A time-out error o ccurred.
Retry the operation. If
you get the same message
again, reboot the computer.
If
necessary, Please call
technical support.
E
4
6005
8104
It takestimefor thechange
processing of pair status.
Please wait for a while,
and then refresh the screen
and confirm the pair
status has b een changed
properly. If the pair status
is not
changed, check th e
MCU/RCU configuration
and the condition of the
paths
between the CUs.
It takes time for the change
processing of pair status.
Please wait a while,
then refresh the screen
and
confirm the pair
status has been changed
properly. If the pair status
is not
changed, check the
MCU/RCU configuration
and
the condition of the
paths between the CUs.
i
4
6005 8700
Please retry operation. Retry the operation.
i
4
200
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes