HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
3005 58472
Operation of the po ol has
failed.
Pool cannot be registered
when:
•
V-VOL management
area is not initialized.
•
V-VOL management
area is not installed.
•
there is no space left in
the
V-VOL management
area.
• the
pool is blocked.
•
the state of shared
memory is abnormal.
Pool cannot be deleted
when:
•
V-VOL management
area is not initialized.
•
V-VOL management
area is not installed.
•
XP Snapshot pair still
remains in the pool.
•
P-VOL still remains in the
pool.
• the
pool is blocked.
The threshold of pool cannot
be
changed when:
• the
threshold is set
below the usage rate of
the
pool.
When the pool cannot be
registered, do the following:
•
check the installation
status of the
V-VOL
management area,
when the V-VOL
management area is
not
initialized.
•
check the installation
status of the
V-VOL
management area,
when the V-VOL
management area is
not
installed.
•
check the free area of
the V-VOL management
area, when there is no
free area in the V-VOL
management area.
•
check the status of the
pool
when the pool is
blocked.
•
Status of the shared
memory by the
Maintenance window
of
S VP, when the state
of shared memory is
abnormal.
When the
pool cannot be
deleted, do the following:
•
check the installation
status of the
V-VOL
management area,
when the V-VOL
management area is
not
initialized.
•
check the installation
status of the
V-VOL
management area,
when the V-VOL
management area is
not
installed.
•
delete the XP Snapshot
pair if it still remains in
the pool.
•
delete the XP Snapshot
pair if P-VOL still remains
in the
pool.
•
check the status of the
pool
when the pool is
blocked.
E
6
3005
5847 3
An error occurred when
setting the Pool. Check the
error message of the logical
volume(s) in the Pool.
Check the error message of
the log ical volume(s) i n the
Pool.
E
6
XP24000/XP20000 Remote Web Console Error Codes
143