HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
1005 55560
The fibre address, topology,
channel speed, and
Initiator/Target cannot
be
changed because the
specified port is an iSCSI
port.
Check the setting.
E
6
1005 55561
An error occurred during
SVP p rocessing. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
1005 55566
An error occurred during
SVP proces
sing. If this
problem pe
rsists, please call
technica
l
support.
If this pro
blem persists, call
technical
support.
E
2
1005 55 568
Thenicknameofthe
specified target name or
iSCSI name is already
registered.
Check the setting.
E
6
1005 55569
The specified Group-ID is
already registered.
Check the setting.
E
6
1005 55570
Thecharacter or thenumber
of characters that cannot
be
specified was specified
in
target name, target
alias, iSCSI name and the
nickname of iSCSI name.
Check t
he
setting.
E
6
1005
55571
The target cannot be
set
because the number
of targetsexceedsthe
maximum that can be set in
aport.
Check the setting.
E
6
1005 55572
The iSCSI name cannot b e
set
because the number of
iSCSI names exceeds the
maximum that can be set in
aport.
Check the setting.
E
6
1005 55573
The default nickname cannot
be
specified in the nickname
setting of iSCSI name.
Correct the settings, then
retry the operation.
E
6
1005
55574
The setting of the specified
port cannot be changed
because the attribute of the
specified port is Initiator or
External.
Check the setting.
E
6
1005 55591
The specified iSCSI target
name
cannot be registered
because the name is
reserved for Target#00.
Please register another
name.
W
6
1005 56301
An error occurred during
SVP processing.
If this
problem persists,
please
call technical
support.
If this problem persists, call
technical support.
E
2
120
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes