HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
1005
1904
The specied volume cannot
be
assigned as a LUSE
volume or a c ommand
device, and the path of
thevolumecannotbeset
because it is being used as
a
Pool volume.
Select another volume.
E
6
1005 1905
There are virtual volumes
and non-virtual volumes in
the
volumes specied to
compose a LUSE volume.
Select another volume.
E
6
1005 1906
The specie
d
volume cannot
be set
as a c
ommand device
because it
is
being used as
avirtual
volume.
Select another volume.
E
6
1005 1912
The specied volume is a
remote command device,
and therefore the command
device setting or the
command
device security
setting cannot be set or
released.
Correct the settings, then
retry the operation.
E
6
1005 1918
An external volume is
mapped to the external
port to be operated. Delete
theexternalvolumethatis
mapped
to the external port
to
be operated, and then
retry the operation.
Delete the external volume
that is mapped to the
external port to be operated,
then
retry the operation.
E
6
1005 1921
The specied volume is not
aLUSEvolume.
Check the volume, then retry
the
operation.
E
6
1005 2005
An error occurred during
SVP p rocessing. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
1005 2009
An error occurred during
SVP p rocessing. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
1005 2010
T
he
LDEV is being used
b
ythe host, oranerror
o
ccurred d uring SVP
processing. Recovery
processing may take about
1minute. Please wait fora
while.
Check if the host is
performing I/O operations
on the
target path or volume.
E
6
1005 2013
An error occurred during
SVP p rocessing. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
1005 2015
An error occurred while
connecting to the subsystem.
Please wait for a while, and
then
retry the operation.
A communication error
occurs. If the same error
occurs despite retrying, call
technical support.
E
6
116
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes