HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
1005 1185
You are trying to insert
in the
linkage operation
including LUSE. (LDEV
number is inserted to the
LDEV numbers created in
LUSE).
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
1005 1186
In the linkage operation
including LUSE, the path is
specified to other than the
top.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
1005 1187
You cannot expand the LU
because the host mode of
the
group with paths which
are defined in the LU is
corresponding to online
LUSE.
The Configuration
informat
ion has been
already c
hanged.
Please ch
eck the settings
and request the setting of the
configur
ation information
again.
E
6
1005 1190
To define a path to the
volume from an iSCSI
port, the volume must be
read/write-enabled and
also usable as an S-VOL
(secondary volume).
Correct the settings, then
retry the operation.
E
6
1005
1194
No information can be
changed about this external
port because the port has
an
external volume.
Please correct the settings,
then retry.
E
6
1005 1195
The sp
ecified volume(s) are
used
as a
command device.
Please correct the settings,
then retry.
E
6
1005 1196
You cannot create a LUSE
volume by concatenating
LUs and Cross-system Copy
LUs.
Please correct the settings,
then retry.
E
6
1005 1197
You cannot set high-speed
mode to a
package
including an external
port.
Please correct the settings,
then retry.
E
6
1005 1198
Si
nce a
path is defined to
an
external LU, you cannot
s
et
high-speed mode.
Please correct the settings,
then retry.
E
6
1005 1199
Thepathcannot beset
to
the specified volume
because the volume is not
an open-systems volume.
Check the set ting.
E
6
1005 1201
The selection of High Speed
mode/MIX mode is invalid.
The specified port cannot
be
changed to High Speed
mode/MIX mode.
Change the parameter to a
path
where the High Speed
mode/MIX mode can be
set, then retry the operation.
E
6
XP24000/XP20000 Remote Web Console Error Codes
113