HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)

Part
Code
Error
Number
Error Messag e
Recommended Ac tion
Severity
Level
Failure
Level
1005 1130
You cannot specify the
default nickname when
setting the nickname of a
host group or a host.
Correct the specified
contents, and request again.
E
6
1005 1131
No more host groups can
be
set, because the number
of host groups has reached
the
maximum (254) th at can
be set in a port.
No more host groups can
be
set, because the number
of host groups has reached
the maximum (254) that can
be
set in a por t. Reduce the
number of host groups, then
retry the operation.
E
6
1005 1132
Failed to set the WWN
because the number of
WWNs exceeds the
maximum that can be set in
aport.
The Configur
ation
information has been
already changed.
Please check the settings
and
reque
st the
setting of the
configuration information
again.
E
6
1005 1133
Failed to set the host mode
because the number of
host modes exceeds the
maximum that can be set in
aport.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
1005
1134
Failed to set the path
because the number of
paths exceeds the maximum
that can be set in a port.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
1005 1135
An error occurred. If this
problem persists, please call
technical support.
When PORT information
(Fibre Address/Fibre
Topology/Channel Speed)
is set, multiple change
instructions are set to the
same PORT.The errordoes
not
occur normally because
it
is guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
1005 1136
An error occurred. If this
problem persists, please call
technical support.
When CHA high-speed
mode is set, multiple change
instructions are set to the
same PORT.The errordoes
not
occur normally because
it
is guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
XP24000/XP20000 Remote Web Console Error Codes
111