HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes (AE131-96014, September 2007)

Part
Code
Error
Number
Error Message
Recommended Action
Severity
Level
Failure
Level
1005 1003
You are tr ying to set multiple
paths to the same volume
from one group.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
1005
1004
Multiple volumes are
specified to a single port,
group or LUN combination.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
1005 1005
The following volumes
cannot
be s
pecified
when you c
hange path
configurations:
•
Volumes that do not exist
•
Volumes other than top
LUs in expanded LUs
•
Volumes reserved by
Auto L UN
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
1005 1007
Failed to remove the path.
The specified path is the last
path of the volumes used for
Continuous Access, Business
Copy, Cross-system Copy,
Auto LUN, or XP Snapshot.
Check the setting.
E
6
1005 1009
The emulation type of the
volumes is not for open
systems, or the volumes are
not mounted. Check the
setting.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
1005 1010
An
error occurred during
SVP p rocessing. If this
problem persists, please call
technical support.
If this problem persists, call
technical support.
E
2
1005 1011
An error occurred. If this
problem persists, please call
technical support.
Thevolumewhich linksas
an
expanded LU extend
over CU#. The error does
not
occur normally because
it is
guarded in the screen.
In the
unlikely event that
this error occurs, contact
technical support.
E
2
1005 1012
LU path is set to a volume
which links as an expanded
LU.
The Configuration
information has been
already changed.
Please check the settings
and request the setting of the
configuration information
again.
E
6
106
HP
StorageWorks XP Remote Web Console for Storage System Messages and Error Codes