HP StorageWorks XP24000/XP20000 Disk Array Site Preparation Guide (AE002-96055, September 2010)

Figure 5 Expansion (dual) rack recommended floor cutouts – option 2
.
DescriptionItem
4.50 in. (115 mm)A
2.50 in. (57 mm)B
6.00 in. (150 mm)C
Allowable tolerance: +/– 0.125 in (+/– 3.2 mm)
XP24000 cutouts
The figures in this section show the locations of floor cutouts under the XP24000 DKC and XP24000
DKU for electrical cables. Position floor cutouts toward the center of the cabinet. The position may be
off-center as long as the cutout is within the allowable range and allows smooth entrance of external
cables. Be sure to check the relationship between the position of the cutout and the opening on the
bottom of the cabinet, since they must align.
XP24000/XP20000 Disk Array Site Preparation Guide 31