HP StorageWorks XP24000/XP20000 Disk Array Site Preparation Guide (AE002-96055, September 2010)

42106.68U height
Weights
Use the approximate packaged weights when determining delivery requirements, and unpackaged
weights to calculate the total weight of your configuration. Plan your facility to accommodate the
weight of the maximum configuration for each disk array even if you expect to start with an empty
rack and add components later. For weights of individual components, see Table 5 on page 15.
Table 3 XP24000 DKC and DKU min/max configuration weights
lb (min/max config.)kg (min/max config.)Frame configuration
1113/1745505/791DKC, unpackaged
1323/1955600/887DKC, packaged
849/1579385/716DKU, unpackaged
1049/1779476/807DKU, packaged
NOTE:
For each DKC or DKU shipment from the USA to locations outside the USA and Canada, add 59 kg
(130 lbs.) for a wooden international shipping crate. Within the USA, most shipments use a special
carrier process in which frames are shipped without pallets, ramps, and cartons. In these cases, the
packaged weight is the unpackaged weight plus 23 kg (50 lb). For upgrade DKU packaging (includes
a ramp), add 23 kg (50 lbs.).
Table 4 XP20000 maximum configuration weights
560 kg, 1234 lbsWeight, primary rack, maximum
440 kg, 969 lbsWeight second rack, maximum
Component heat, power, and weight specifications
Table 5 lists heat, power, and weight specifications for individual components. By adding the
specifications for each component in your system, you can determine approximate totals for your
configuration.
Table 5 Component heat, power, and weight specifications
Weight
(kg/lbs)
Power (kVA)Heat Output
(kW)
DescriptionProduct Number
476/10490.8600.834
HP XP24000 DKC Disk
Control Frame
AE131A
9.20/20.28——
3P/30A/60Hz 115J-
AP8508 2 Cords
#001
XP24000/XP20000 Disk Array Site Preparation Guide 15