HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

DescriptionItem
The number of LDEVs.Num. of LDEVs
Micro Program Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,GMT,[Install],Micro Program,,Normal end,,,Seq.=xxxxx
+Micro Media=Floppy Disk
+Exchange How=Online
+Open Port Mode=Stop SCSI
+Reboot Grp.=By 1/2
+{Micro Kind, Old Ver, New Ver}=[{DKCMAIN, 5007000000, 5007000001},
{SVP, 50070000, 50070001},(snip)],Num.of Kind=10
[Install]
Install function
Micro Program
Micro Program operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 61 Detailed Info: Micro Program Operation
DescriptionItem
The media which the microprogram to be exchanged is stored (Floppy disk, CD-ROM,
SVP HDD, HDD Backup or remote transfer).
Micro Media
The method to exchange the microprogram.Exchange How
Online: Exchanging the microprogram online, Offline: Exchanging the microprogram
offline.
The port exchange mode of an open system (Stop SCSI, Non-Stop SCSI, Skip SCSI
Normal, Skip SCSI Force, Alternate Manual, or Alternate Auto). However, it is not output
when the PCB of the open system is not installed, or MP reboot is not executed.
Open Port Mode
The reboot group (By1/2, By1/4, or By One). However, it is not output when
microprogram is changed offline, or MP reboot is not executed.
Reboot Grp.
The kind of microprogram.Micro Kind
The old version number of the microprogram.Old Ver
The new version number of the microprogram.New Ver
The number of the kind of microprogram.Num.of Kind
XP24000/XP20000 Audit Log User and Reference Guide 99