HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

Make Vol./Vol. Init Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Make Vol./Vol. Init,,Normal end,,,Seq.=xxxxx
+{PG,LDKC:CU:LDEV,Slot,Emulation,Size,Unit,System Disk,SSID}=[{1-1-(1),
0x00:0x14:0x00,
-,OPEN-V,205440,LBA,Disable,0x0005}],Num. of LDEVs=1
[Install]
Install function
Make Vol./Vol. Init
Make Vol./Vol. Init operation
No parameter or Non Format
No parameter is selected. This operation uses the following parameters, as shown in the following
table.
Table 59 Parameters: Make Vol./Vol. Init Operation
DescriptionParameter
Formatted Make Volume or Volume Initialize.No parameter
Unformatted Make Volume or Volume Initialize.Non Format
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 60 Detailed Info: Make Vol./Vol. Init
DescriptionItem
The parity group number.PG
The LDKC, CU and LDEV numbers.LDKC:CU:LDEV
The emulation type.Emulation
The capacity of CV.Size
The unit of the capacity of CV.Unit
The setting status of system disk.System Disk
Disable or Enable is output.
The subsystem ID.SSID
Install Function98