HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

DescriptionItem
The speed mode of the Fibre PCB is indicated for open systems.Fibre PCB Mode
<Standard>: Standard mode. <High Speed/MIX>: High speed mode/Mix mode.
The type of Initiator or Target.Initiator/Target
The channel speed is indicated for open systems.Channel Speed
1: 1 Gbps, 2: 2 Gbps, 4: 4 Gbps, Auto: Auto mode.
Indicates the range of the CU number which the port belongs.CU Number
The number of ports.Num of Ports
The HTP is indicated for FICON.HTP
The LCP is indicated for ESCON.LCP
The emulation type is indicated for mainframe systems.Emulation
The number of Channel Adapters (CHA).Num. of Channel
Adapters (CHA)
Example 2 (installing additional subsystems, ECC Groups or LDEVs)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Install],Install,,Normal end,,,Seq.=xxxxx
+{DKA,Transfer Rate}=[{DKA-1AL,4},{DKA-1BL,4},{DKA-2ML,4},{DKA-2NL,4}],
Num. of DKAs=4
+{DKU,AC-BOX}=[{DKU-R1,3-phase AC Box(30A)}],Num. of DKUs=1
+FSW=[FSWR10-L,FSWR10-U,FSWR11-L,FSWR11-U,FSWR12-L,FSWR12-U,FSWR13-L,FSWR13-U,
FSWR18-L,
FSWR18-U,FSWR19-L,FSWR19-U,FSWR1A-L,FSWR1A-U,FSWR1B-L,FSWR1B-U],Num. of FSWs=16
+{PG,RAID Level,Drive Type,Emulation,Concatenation}={3-1,RAID1 (2D+2D),
DKR2F-J300FC,
OPEN-V,3-3},
++{LDKC:CU:LDEV,Emulation,Size,Unit,System Disk,SSID}=[{0x00:0x05:0x00,
OPEN-V,1125767168,
LBA,Disable,0x0009}],Num. of LDEVs=1
+{PG,RAID Level,Drive Type,Emulation,Concatenation}={3-2,RAID5 (3D+1P),
DKR2F-J300FC,
OPEN-V,-},
++{LDKC:CU:LDEV,Emulation,Size,Unit,System Disk,SSID}=[{0x00:0x05:0x10,
OPEN-V,1688650752,
LBA,Disable,0x0009}],Num. of LDEVs=1
+{PG,RAID Level,Drive Type,Emulation,Concatenation}={3-3,RAID1 (2D+2D),
DKR2F-J300FC,
OPEN-V,3-1},
++{LDKC:CU:LDEV,Emulation,Size,Unit,System Disk,SSID}=[{0x00:0x05:0x01,
OPEN-V,1125767168,
LBA,Disable,0x0009}],Num. of LDEVs=1
+Num. of PGs=3
+{B4,SPARE,Drive Type}=[{3,1,DKR2F-J300FC}],Num. of SPAREs=1
[Install]
Install function
Install
Install operation
Normal end
The operation has ended normally.
Install Function90