HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

HP XP Auto LUN Software function
Set Migration Vol
Set Migration Vol operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 233 Detailed Info: Set Migration Vol Operation
DescriptionItem
Indicates that the manual migration plan is set or deleted; Create: Set, Delete: DeletedInstruction
The logical volume ID of the migration source. The number on the left of the colon is an
LDKC number, the number between the colons is a CU number and the number on the
right of the colon is an LDEV number.
SourceLDEV
The logical volume ID of the migration target. The number on the left of the colon is an
LDKC number, the number between the colons is a CU number and the number on the
right of the colon is an LDEV number. This value is output only when the manual migration
plan is set.
TargetLDEV
The program which set this migration plan; for HP XP Auto LUN Software, 0x00 is output.
For a program other than HP XP Auto LUN Software, the ID of the program product is
output.
OwnerID
The result of operation.Result
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end, Not Execute: Not executed
xxxx: Part code, yyyyy: Error code
The number of manual migration plans set and deleted.Num. of LDEVs
Set Reserved Vol Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Auto LUN],Set Reserved Vol,,Normal end,,,Seq.=xxxxxx
+{Set,LDKC:CU:LDEV,Result}=[{Reserved,0x00:0x00:0x00,Normal end},
{ Reserved,0x00:0x00:0x01,Normal end},{ Reserved,0x00:0x00:0x02,Normal end},
{ Reserved,0x00:0x00:0x03,Normal end},{ Reserved,0x00:0x00:0x04,Normal end},
{ Reserved,0x00:0x00:0x05,Normal end},
{ Reserved,0x00:0x00:0x06,Normal end}] Num. of LDEVs = 7
[Auto LUN]
HP XP Auto LUN Software function
Set Reserved Vol
Set Reserved Vol operation
Normal end
HP XP Auto LUN Software Function260