HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

Detailed information displays for this operation, as shown in the following table.
Table 229 Detailed Info: Set SSID Operation
DescriptionItem
The SSID number.SSID
NOTE:
The SSID specified when Volume Initialize or Make Volume is executed is also
output.
The LDKC, CU and LDEV numbers.LDKC:CU:LDEV
The number of SSIDs.Num. of SSIDs
Volume Initialize Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[VLL],Volume Initialize,,Normal end,,,Seq.=xxxxxx
+{PG,LDKC:CU:LDEV}=[{XX-XX-(X),0xXX:0xXX:0xXX},{XX-XX-(X),0xXX:0xXX:0xXX}],Num. of PGs=2
[VLL]
Virtual LVI / Virtual LUN function
Volume Initialize
Volume Initialize operation
No parameter or Non Format
No parameter is selected. This operation uses the following parameters, as shown in the following
table.
Table 230 Parameters: Volume Initialize Operation
DescriptionParameter
Formatted Volume Initialize.No parameter
Unformatted Volume Initialize.Non Format
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 231 Detailed Info: Volume Initialize Operation
DescriptionItem
The parity group numbers.PG
Virtual LVI / Virtual LUN (VLL) Function256