HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

DescriptionItem
The start LBA.Start LBA
NOTE:
A hyphen (-) is output when not specified.
The emulation type.Emulation
The user-specified capacity.Size
The unit of the CV capacity.Unit
NOTE:
The output unit is different according to the setting.
KB: For open-system volume
Cyl: For mainframe-system volume
LBA: When LBA is specified
Indicates system disk status.System Disk
Enable: Enabled, Disable: Disabled
The number of LDEVs.Num. of LDEVs
Make Volume Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[VLL],Make Volume,,Normal end,,,Seq.=xxxxxx
+[PG,LDKC:CU:LDEV,Emulation,Size,Unit,System Disk]=[{X-X-(X),0xXX:0xXX:0xXX,OPEN-V,
XXXXXXXXXXXXXXXX,KB,Disable },
{X-X-(X),0xXX:0xXX:0xXX,OPEN-V,XXXXXXXXXXXXXXXX,KB,Disable}],Num. of LDEVs=2
[VLL]
Virtual LVI / Virtual LUN function
Make Volume
Make Volume operation
No parameter or Non Format
No parameter is selected. This operation uses the following parameters, as shown in the following
table.
Table 227 Parameters: Make Volume Operation
DescriptionParameter
Formatted Make Volume.No parameter
Unformatted Make Volume.Non Format
Normal end
The operation has ended normally.
Seq.=xxxxxx
Virtual LVI / Virtual LUN (VLL) Function254