HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

Inflow-Control Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Ext Stor],Inflow-Control,Enable,Normal end,,,Seq.=xxxxx
+{Group,Result}=[{E1-1,Normal End},{E1-2,Error(605-3003)},{E1-3,Normal End},
{E1-4,Normal End}],Num. of Groups=XXX
[Ext Stor]
HP XP External Storage Software function
Inflow-Control
Inflow-Control operation
Enable
Enable is selected as the parameter. The operation uses the parameters shown in the following table.
Table 222 Parameters: Inflow-Control Operation
DescriptionParameter
The cache memory is used.Enable
The cache memory is not used.Disable
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 223 Detailed Info: Inflow-Control Operation
DescriptionItem
External volume group number for the executed setting operation.Group
The result of operation.Result
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of external volume groups set by the setting operation.Num. of Groups
WwnTimer Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Ext Stor],WwnTimer,,Normal end,,,Seq.=xxxxxx
+{WWN,I/O-TOV,Quedepth,LinkDown,Result}=[{50060E8000C3E214,15,8,180,Normal End},
{50060E8000C3E214,15,8,180,Error(605-3003)},{50060E8000C3E214,15,8,180,Normal End},
Num of WWNs=XXX
[Ext Stor]
HP XP External Storage Software Function250