HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

Change-CacheMode Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Ext Stor],Change-CacheMode,Enable,Normal end,,,Seq.=xxxxx
+{Group,Result}=[{E1-1,Normal End},{E1-2,Error(605-3003)},{E1-3,Normal End},
{E1-4,Normal End}],Num. of Groups=XXX
[Ext Stor]
HP XP External Storage Software function
Change-CacheMode
Change-CacheMode operation
Enable
Enable is the selected parameter. The operation uses the parameters shown in the following table.
Table 218 Parameters: Change-CacheMode Operation
DescriptionParameter
The cache memory is used.Enable
The cache memory is not used.Disable
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 219 Detailed Info: Change-CacheMode Operation
DescriptionItem
External volume group number for the executed setting operation.Group
The result of operation.Result
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of external volumes groups that setting operation was executed.Num. of Groups
Check-Paths Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Ext Stor],Check-Paths,,Normal end,,,Seq.=xxxxx
[Ext Stor]
HP XP External Storage Software function
HP XP External Storage Software Function246