HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

31 Universal Replicator (UR) for Mainframe
Function
Add-Pair Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[UR],Add-Pair,,Normal end,,,Seq.=xxxxxx
+{P-VOL(LDKC:CU:LDEV),S-VOL(LDKC:CU:LDEV),MirrorID,S/N,CTRLID,Priority,
Initial Copy,
M-JNLG,R-JNLG,Path Gr.ID,Error Level,CFW,Result}=[{0x00:0x00:0x00,0x00:0x20:0x00,0x00,
65432,5,32,Entire,0x02,0x00,Default,Group,Copy to S-VOL,Normal end},
-{0x00:0x00:0x01,0x00:0x20:0x01,0x00,65432,5,32,Entire,0x02,0x00,Default,Group,
Copy to S-VOL, Normal end}],Num. of Pairs=2
[UR]
Universal Replicator for Mainframe function (for IBM z/OS)
Add-Pair
Add-Pair operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 205 Detailed Info: Add-Pair Operation
DescriptionItem
The LDKC, CU and LDEV numbers of the primary data volume.P-VOL(LDKC:CU:LDEV)
The LDKC, CU and LDEV numbers of the secondary data volume.S-VOL(LDKC:CU:LDEV)
The mirror ID.MirrorID
The serial number of the logical device storage system.S/N
The controller ID.CTRLID
The priority of the copy.Priority
Indicates whether initial copy or paircreate operation for Delta resync is executed or
not.
Initial Copy
Entire: execute initial copy, None: do not execute initial copy,
XP24000/XP20000 Audit Log User and Reference Guide 233