HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

DescriptionItem
The speed of initial copy. 150: Low speed. 500: Medium speed. 1500: High speedCopy Pace
The path blockade watch period set.Path Watch Time
The unit is minutes, hours or days.
If it is set to 30 minutes, it will be 30(min).
Whether to transfer the path blockade watch period set to the master journal group to
the restore journal group.
Forward Path
Watch Time
Yes: Transfer. No: Do not transfer.
Whether to store the journal data in the restore journal group in cache.Use of Cache
Use: Store the journal data in cache. Not used: Store the journal data in journal volume
The transfer speed of the communication line. The unit is megabits per second (Mbps).Speed of
Line(Mbps)
Indicates the operation mode when Delta resync operation have failed.Delta resync Failure
Entire: Copy the entire data volume, None: Do not copy the data volume
The result of the operation.Result
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of journal groups.Num. of JNL Grps
Journal-Vol Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00, [Cnt Ac-J],Journal-Vol,Add,,Normal end,,,Seq.=xxxxxx
+{LDKC,JNLG}={0x00,0x00}
++{LDKC:CU:LDEV,Result}=[{0x00:0x00:0x01,Normal end},{0x00:0x00:0x02,Normal end},
{0x00:0x00:0x03,Normal end}]
+{LDKC,JNLG}={0x00,0x01}
++{LDKC:CU:LDEV,Result}=[{0x00:0x01:0x01,Normal end},{0x00:0x01:0x02,Normal end},
{0x00:0x01:0x03,Normal end},(snip)
-{0x00:0x01:0x3E,Normal end},{0x00:0x01:0x3F,Normal end}]
+Num. of JNL Grps=2
[Cnt Ac-J]
HP XP Continuous Access Journal Software function
Journal-Vol
Journal-Vol operation
Add
Add is selected as the parameter. The operation uses the following parameters as shown in the
following table.
Table 196 Parameters: Journal-Vol Operation
DescriptionParameter
The journal volume is added.Add
HP XP Continuous Access Journal Software Function224