HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

DescriptionItem
The SCP delay time when the pair is suspended. The unit is second.SCP Time(s)
The number of parallel operation of initial copy by CU. (1 to 16)Parallel Initial
Copy(CU)
The number of CUs set.Num. of CUs
Change Pair Option Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx,00:00,[TC],Change Pair Option,,Normal end,Seq.=xxxxxx
+{M-VOL(LDKC:CU:LDEV),Fence Level,CFW, Error Level,Result}=
-{0x00:0x00:0x00,Never,Copy To R-VOL,Group,Normal End},{0x00:0x01,Never,
Copy To R-VOL,Group,Normal End},
(snip)
-(snip), Num. of Pairs=xx
[TC]
TrueCopy for Mainframe function (for IBM z/OS)
Change Pair Option
Change Pair Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 188 Detailed Info: Change Pair Option Operation
DescriptionItem
The LDKC, CU and LDEV number of the main volume where the pair option is changed.M-VOL(LDKC:CU:LDEV)
The changed fence level (the condition that MCU rejects the write operation to the
main volume).
Fence Level
Never: No condition, Data: S-VOL data, Status: S-VOL status
Indicates whether the setting to copy the CFW data to the remote volume is enabled
or not.
CFW
Only M-VOL: Copy to main volume only is enabled
Copy To R-VOL: Copy to main and remote volume is enabled
The error level changed (handling if trouble occurs).Error Level
This value is output when the pair option of the asynchronous pair is changed only.
Volume: Volume (appropriate volume only is suspended)
Group: Group (suspended by consistency group)
TrueCopy (TC) for Mainframe Function216