HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 182 Detailed Info: Pairsplit-S Operation
DescriptionItem
The port number, host group number and LUN of the primary volume in the
deleted pair sequentially.
P-VOL(Port-G-ID-LUN)
The port number, host group number and LUN of the secondary volume in the
deleted pair sequentially.
S-VOL(Port-G-ID-LUN)
The volume type of the volume on the primary site.Type
P-VOL: Primary volume, S-VOL: Secondary volume
The setting content of forced pair deletion.Force
Yes: Pair is deleted even when MCU cannot communicate with RCU
No: Pair is deleted when MCU can change the pair status to SMPL only
The delete range set. This value is output when the asynchronous pair is deleted
only.
Range
Group: Group (all asynchronous pairs in the consistency group),
CT: C/T (asynchronous pairs which the consistency status of the consistency
group is group and the pair status is PSUE)
LU: LU (specified asynchronous pairs only)
The result of operation.Result
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of deleted pairs.Num. of Pairs
Start Pair Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Cnt Ac], Start Pair,,Normal end,,,Seq.=xxxxxx
[Cnt Ac]
HP XP Continuous Access Software function
Start Pair
Start Pair operation
This operation is executed automatically when you use Paircreate or Pairresync, or change the mode
to Modify (first time only), in the Pair Operation window.
Normal end
The operation has ended normally.
Seq.=xxxxxx
HP XP Continuous Access Software Function208