HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

Detailed information displays for this operation, as shown in the following table.
Table 181 Detailed Info: Pairsplit-r Operation
DescriptionItem
The port number, host group number and LUN of the primary volume in the split
pair sequentially.
P-VOL(Port-G-ID-LUN)
The port number, host group number and LUN of the secondary volume in the
split pair sequentially.
S-VOL(Port-G-ID-LUN)
The volume type of the volume on the primary site.Type
P-VOL: Primary volume, S-VOL: Secondary volume
Indicates whether writing to the secondary volume is enabled.S-VOL Write
Enable: Write enable, Disable: Write disable
The suspend type set.Kind
P-VOL Failure: P-VOL write disable, S-VOL: P-VOL write enable
The suspend rage set. This value is output when the asynchronous pair is split
only.
Range
Group: Group (all asynchronous pairs in the consistency group),
LU: LU (specified asynchronous pair only)
The setting of unreflected data handling. This value is output when the
asynchronous pair is split only.
Mode
Drain, Purge
The result of operation.Result
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of split pairs.Num. of Pairs
Pairsplit-S Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Cnt Ac],Pairsplit-S,,Normal end,,,Seq.=xxxxxx
+{P-VOL(Port-G-ID-LUN), S-VOL(Port-G-ID-LUN),Type,Force,Range,Result}=
-{1A-0x00-0x000, 1B-0x00-0x000,P-VOL,No,Group,Normal End},{1A-0x00-0x001,No,Group,
Normal End},
+{1A-0x00-0x002,No,Group,Normal End},(snip)
-(snip), Num. of Pairs=xx
[Cnt Ac]
HP XP Continuous Access Software function
Pairsplit-S
Pairsplit-S operation
Normal end
The operation has ended normally.
XP24000/XP20000 Audit Log User and Reference Guide 207