HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

Paircreate Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Cnt Ac],Paircreate,,Normal end,,,Seq.=xxxxxx
+{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),S/N,LDKC,ID,ControllerID,Type,
Initial Copy,
Fence Level,Copy Pace,Priority,Diff,CTG, Error Level,Result}=
-{1A-0x00-0x000,GR-0xFE-0x3FF,99999,0x00,Default,4,Async,Entire,Never,15,032,
Auto,0x00,
Group,Normal End}, (snip)
-(snip), Num. of Pairs=xx
[Cnt Ac]
HP XP Continuous Access Software function
Paircreate
Paircreate operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 179 Detailed Info: Paircreate Operation
DescriptionItem
The port number, host group number and LUN of the volume specified to the primary
volume when the pair is created sequentially.
P-VOL(Port-G-ID-LUN)
The port number, host group number and LUN of the volume specified to the
secondary volume when the pair is created sequentially.
S-VOL(Port-G-ID-LUN)
The serial number of the device.S/N
The LDKC number of the paired LDKC.LDKC
The path group ID or SSID.ID
When the path group ID is default setting, the output is Default.
The controller ID.Controller ID
The update copy mode set.Type
Sync: Synchronous mode, Async: Asynchronous mode
The initial copy mode set.Initial Copy
Entire: All copy, None: No copy
The fence level set (the condition that MCU rejects the write operation to the primary
volume).
Fence Level
Never: No condition, Data: S-VOL data, Status: S-VOL status
HP XP Continuous Access Software Function204