HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

Detailed information displays for this operation, as shown in the following table.
Table 177 Detailed Info: Change Pair Option Operation
DescriptionItem
The port number, host group number and LUN of the primary volume where the pair
option is changed sequentially.
P-VOL(Port-G-ID-LUN)
The changed fence level (the condition that MCU rejects Write to the primary volume).Fence Level
Never: No condition, Data: S-VOL data, Status: S-VOL status
The error level changed (handling if trouble occurs).Error Level
This value is output when the pair option of the asynchronous pair is changed only.
Group: Group (suspended by consistency group),
LU: LU (appropriate LU only is suspended)
The result of operation.Result
Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end
xxxx: Part code, yyyyy: Error code
The number of changed pairs.Num. of Pairs
Delete Consistency Group (CTG) Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Cnt Ac],Delete CTG,0x00:0x00,Normal end,,,Seq.=xxxxxx
[Cnt Ac]
HP XP Continuous Access Software function
Delete CTG
Delete Consistency Group operation
0x00
This operation uses the following parameters, as shown in the following table.
Table 178 Parameters: Delete Consistency Group (CTG) Operation
DescriptionParameter
The LDKC number and the consistency group (CT group) number of the consistency group
deleted.
0x00:0x00
LDKC number: 0x00 to 0x01, CT group number: 0x00 to 0x7F
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
XP24000/XP20000 Audit Log User and Reference Guide 203