HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

DescriptionItem
The path blockade watch period set. The unit is second.Path Blockade
Watch(s)
The path blockade SIM watch period set. The unit is second.Path Blockade SIM
Watch(s)
Indicates whether the remote copy related SIM is reported or not.Service SIM
Report, Not Report
Indicates whether the parallel operation of initial copy by CU is enabled or not.Parallel Initial
Copy(CU)
Enable, Disable
The LDKC number.LDKC
The CU number of the connected CU.CU
Indicates whether to report the remote copy-related SIM.Service SIM
Report, Not Report
Indicates whether the host supports PPRC.PPRC Support
Yes: support, No: not support
The SCP delay time when the pair is suspended. The unit is second.SCP Time(s)
The number of parallel operation of initial copy by CU. (1 to 16)Parallel Initial
Copy(CU)
The number of CUs set.Num. of CUs
Change Pair Option Operation
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[Cnt Ac],Change Pair Option,,Normal end,,,Seq.=xxxxxx
+{P-VOL(Port-G-ID-LUN),Fence Level, Error Level,Result}=
-{1A-0x00-0x000,Never,Group,Normal End},{1A-0x00-0x001,Never,Group,Normal End},
{1A-0x00-0x002,Never,Group,Normal End},(snip)
-(snip), Num. of Pairs=xx
[Cnt Ac]
HP XP Continuous Access Software function
Change Pair Option
Change Pair Option operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
HP XP Continuous Access Software Function202