HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}],
Num. of Port Pairs=8
[RCU]
Remote Control Unit function
Delete Path
Delete Path operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 154 Detailed Info: Delete Path Operation
DescriptionItem
The serial number of the device of RCU where the path has been deleted.S/N
The LDKC number of the paired LDKC.LDKC
The path group ID of the path deleted. When the path group is a default setting, Default
is output.
Path Gr. ID
The controller ID of the RCU where the path has been deleted.Controller ID
Indicates SSID.SSID
The port number of MCU.MCU Port
The port number of RCU.RCU Port
The number of path pairs deleted.Num. of Port Pairs
Delete RCU Operation
Example 1 (CU Free is used)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[RCU],Delete RCU,,Normal end,,,Seq.=xxxxx
+{S/N,LDKC,Path Gr. ID,Controller ID}={99999,0x00,Default,4}
Example 2 (CU Free is not used)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[RCU],Delete RCU,,Normal end,,,Seq.=xxxxx
+{S/N,LDKC,SSID}={99999,0x00,0x0004}
[RCU]
Remote Control Unit function
XP24000/XP20000 Audit Log User and Reference Guide 179