HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide (AE131-96013, September 2007)

DescriptionItem
The port number of RCU.RCU Port
The number of port pairs set.Num. of Port Pairs
Add RCU Operation
Example 1 (CU Free is used)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[RCU],Add RCU,,Normal end,,,Seq.=xxxxx
+{S/N, MCU LDKC,RCU LDKC,Path Gr. ID,Controller ID,Min. Path,MIH Time(s),
Round Trip Time(ms),Incident,FREEZE}={99999,0x00,0x00,Default,4,08,015,001,
only to RCU host,Disable}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}],
Num. of Port Pairs=8
Example 2 (CU Free is not used)
user-name,xx,YYYY/MM/DD,HH:MM:SS:xxx, 00:00,[RCU],Add RCU,,Normal end,,,Seq.=xxxxx
+{S/N,MCU LDKC,RCU LDKC,MCU,RCU,SSID,Controller ID,Min. Path,MIH Time(s),
Round Trip Time(ms),Incident,FREEZE}={99999,0x00,0x00,0x00,0x3f,0x0004,4,08, 015,001,
only to RCU host,Disable}
++{MCU Port,RCU Port}=[{1E,3E},{5E,7E},{1F,3F},{5F,7F},{1G,3G},{5G,7G},{1H,3H},{5H,7H}],
Num. of Port Pairs=8
[RCU]
Remote Control Unit function
Add RCU
Add Remote Control Unit operation
Normal end
The operation has ended normally.
Seq.=xxxxxx
Sequence number of log information (0000000000 to 4294967295)
Detailed Information
Detailed information displays for this operation, as shown in the following table.
Table 152 Detailed Info: Add RCU Operation
DescriptionItem
Indicates a serial number of the registered RCU device.S/N
The LDKC number of the connected LDKC.MCU LDKC
The LDKC number of the paired LDKC.RCU LDKC
The path group ID of the registered RCU. When the path group ID is default setting,
Default is output.
Path Gr. ID
The controller ID of the registered RCU device.Controller ID
Remote Control Unit (RCU) Function176